Metal Labware

For beaker upto 5 ltr, casted alloy with other plated parts, with covered jaws, opening up to 8 cm. The horizontal rod is offset so that large vess...

Cast Iron Ring Clamp with 5/16" diameter stem Open boss head fitted with thumb-screw to accept rods from 5/16" to 5/8" dia Extension distance from...

Eisco Labs 2.125" diameter Cast Iron Closed Ring Clamp with Boss Head Boss head fitted with thumb-screw to accept rods 1/2"" dia Extension distanc...

6" Out side diameter cast Iron 5/16" diameter Ring with Boss Head clamp Boss head fitted with thumb-screw to accept rods from 5/16" to 5/8" dia Ex...

5.75" cast iron ring with boss head clamp Boss head fitted with thumb-screw to accept rods from 5/16" to 5/8" dia Extension distance from boss hea...

4" inside diameter cast Iron 5/16" diameter Ring with integral screw clamp Fitted with thumb-screw to accept rods from 5/16" to 5/8" dia Extension...

These clamps are used to hold irregularly shaped items. They provide firm grip to most commonly used glassware items in the labs. The jaws are adju...

Clamp is designed to hold irregularly shaped items. The three, vinyl coated prongs provide a firm grip. Jaws are adjustable on both sides with thum...

3 Prong Adjustable Universal Clamp with a 10" overall length and 0.375 diameter rod Perfect for holding both regular and irregular shaped glasswar...

Two prong, adjustable clamp Integral bosshead Universal- clamp is ideal for use with straight sided glassware and apparatus such as burettes, tube...

VERSATILE UNIVERSAL CLAMP || 2-prong single adjustable clamp with a maximum opening of 1", ideal for securely gripping and holding lab glassware, ...

This clamp with bosshead is ideal for use with straight sides glassware and apparatus such as burettes, tubes & flask necks. The jaws are coate...

This clamp is ideal for use with straight sides glassware and apparatus such as burets, tubes & flask necks. The jaws are coated with non-slip ...

This jumbo size, universal clamp is designed to hold a variety of items. The two, vinyl coated jaws provide a firm grip and are adjustable on both ...

2 Prong Adjustable Universal Clamp with an adjustable 7.5"-8" length This clamp with boss head is ideal for use with straight sides glassware appa...

This clamp is ideal for use with straight sides glassware and apparatus such as burets, tubes & flask necks. The jaws are coated with non-slipv...

New design with expanded feet. Cast iron, heavy duty, excellent stability. Length - 21 cm; Width - 13.5 cm; Weight - 1600 g

New design with expanded feet. Cast iron, heavy duty, excellent stability. Length - 16 cm; Width - 10 cm; Weight - 900 g

HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of chemical-resistant cast iron with a blue coating and a 60cm rod m...

HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a 50cm rod m...

HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a 50cm rod m...

HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of chemical-resistant cast iron with a blue coating and a 90cm rod m...

Cast iron top with removable legs for easy storage. Top painted with heat resistance paint. O.D. 10.5 cm, Height 21 cm

12" tall circular tripod stand Made from plated mild steel Inner diameter: 2.5" Legs measure 5.5" apart Great for any science or home laboratory 1...

Stand made of Stainless Steel wire, height 90 mm, fitted with ceramic center iron mesh.

Stand made of Stainless Steel wire, height 125 mm, fitted with ceramic center iron mesh.

Both plates are anodised. Size 20 x 20 cm Aluminium with stainless steel operating screw top plate with 10 mm tapped hole in right rear corner for...

HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a 100cm rod ...

Die-casted in black finish, accepts rods up to 16 mm dia, at right angle to each other. Bosshead with T-pin type screws

Die-casted in black finish, accepts rods up to 16 mm dia, at right angle to each other. Bosshead with metal thumb screw

This range of ‘A’ bases are made in cast iron and can be nested in one another. Powder coated finish with 10 x 1.5 mm thread. Base Retort Stand ‘A...

This range of ‘A’ bases are made in cast iron and can be nested in one another. Powder coated finish with 10 x 1.5 mm thread. Base Retort Stand ‘A...

This range of ‘A’ bases are made in cast iron and can be nested in one another. Powder coated finish with 10 x 1.5 mm thread. Base Retort Stand ‘A...

HIGH QUALITY || Rectangular retort base made of corrosion resistant, powder coated pressed steel - Features rubber strips to protect surfaces STAB...

Jumbo sized clamp holder Fits rods 5mm-20mm in diameter Metal thumb screws with grip allows for easy adjustment Universal Clamp Holder, Jumbo Size...

Made of high quality steel, this laboratory triangular tripod stand features rubber feet to prevent slipping on surfaces. Stand measures 8.25" tall...