Skip to content

Heat and Thermodynamics

Set of Pump Plate (PH0156B) & Bell Jar (PH0176CN8)

A complete set of pump plate machined and bell jar. Made of aluminium metal, with tube for connection to pump and stopcock for air regulation on ce...

View full details
PH0156E

Set of Pump Plate (PH0156C) & Bell Jar (PH0176CN8)

A complete set of pump plate machined and bell jar. Made of aluminium metal, with tube for connection to pump and stopcock for air regulation on ce...

View full details
PH0156F

Set of Vacuum Pump (PH0166B) & Bell Jar (PH0176CN8)

This is an integral system with the pump plate & hand vacuum pump. The plate comes with a rubber seal which facilitates sealing in bell jar exp...

View full details
PH0166F

Simple Gas Preparation Kit

Comprises with plastic tank with lid, test tube stand, five test tube 150x24mm and stopper, special gas chimney shelf, delivery tube and tubing con...

View full details
CH0506

Simple Thermocouple - Copper-constantan

One each wires copper and constantan approximately 305 mm long, twisted and brazed together.One each wires copper and constantan approximately 305 ...

View full details
PH0426

Sling Psychrometer Kit - Determine Relative Humidity & Dew Point

The 7-piece Sling Psychrometer Kit contains: (1) dry bulb thermometer (6.5"L), (1) wet bulb thermometer (6.5"L), (1) wooden handle (5"), (1) cloth...

View full details
PH1120142

Solar Cell Apparatus, Selenium Photo-Voltaic Cell - Eisco Labs

Solar Cell Apparatus. Apparatus is comprised of a selenium photo-voltaic cell. For use with the motor (SKU: PH0467L) to demonstrate the production...

View full details
PH0467L

Spare Bulb for Hero's Engine (Glass) - Eisco Labs

Spare bulb for Hero's engine apparatus (PH0498A) Borosilicate Glass Length: Approx. 7 in Propels itself via escape of steam Bunsen Burner required...

View full details
PH0498B

Spare Heating Element for Calorimeter (Eisco PH0454A) - Electric Calorimeter Double Wall - Eisco Labs

REPLACEMENT || Spare heating element for use with Eisco Labs part number PH0454A CALORIMETER || For use with an electric double-walled calorimeter...

View full details
PH0454B

Spare, Pack of 10 pcs. Cast iron bars Size 70 x 6 mm dia.

Pack of 10 pcs. Cast iron bars size 70 x 6 mm dia.Spare, Pack of 10 pcs. cast iron bars size 70 x 6 mm dia.

PH0380B

Spouting Cylinder, Metal

Demonstrating principle that the pressure increases with depth 2.3" (60mm) diameter pipe 15.5" (400mm) total height For demonstrating the principl...

View full details
PH0196

Spouting Cylinder, Metal - Premium

Demonstrating principle that the pressure increases with depth Premium design For demonstrating the principle that pressure increases with depth. ...

View full details
PH0196-PR

Steam Engine Model - Working Piston, Slide Valve, and Link Motion - Eisco Labs

Steam engine model ideal for classroom demonstrations Cross-sectioned cylinder to show internal operation Working parts - piston, slide valve both...

View full details
PH0483

Steam Engine Model with Boiler - Eisco Labs

Operates on 220V AC Functional steam engine model Durable metal base Horizontal boiler and whistle with safety valve Operation of a commercial ste...

View full details
PH0485

Steam Generator - Iron

Cylindrical vessel 280 x 115 mm, 1.5 liters capacity, neck 23 mm dia. With side tube & water gauge. Iron, cylindrical vessel 280 x 115 mm over...

View full details
PH0458B

Steam Generator, 1.5L Capacity, 9.5" Height, Copper - Eisco Labs

Steam Generator with a 1.5L capacity, made from quality copper General use for a this steam generator is for creating high pressure and gas for ph...

View full details
PH0458A

Steam Heater

Cylindrical copper vessel 180 x 115 mm with filling tube, steam vent and vertical tube. Sliding fit Brass tube for thermometer. Cylindrical copper...

View full details
PH0460

Syphon Barometer - 41" Long, 3.5" Wide - Celsius and Fahrenheit Temperature Graduations - Eisco Labs

Syphon Barometer. Clear marking are easy to read. Displays both Celsius and Fahrenheit graduations. Measures 41" long, 3.5" wide. No mercury suppl...

View full details
PH0221

Thermal Conductivity Bar

The durable liquid crystal strips embedded in the bars show how a red zone of 40°C moves up the bars. The colours give a dramatic view of conductio...

View full details
CND16

Thermal Conductivity Kit - Aluminium

Aluminium, Dia. 3 mm Conductivity 240 Nominal

PH0401B

Thermal Conductivity Kit - Brass

Brass, Dia. 1.5 & 3 mm Conductivity 128 Nominal

PH0401D

Thermal Conductivity Kit - Copper

Copper, Dia. 1.5 & 3 mm Conductivity 395 Nominal

PH0401C

Thermal Conductivity Kit - Glass

Glass, Dia. 3 mm Conductivity 0.65 Nominal

PH0401A

Thermal Conductivity Kit - Iron

Iron, Dia. 1.5 & 3 mm Conductivity 72 Nominal

PH0401E

Thermal Conductivity Kit, Set of 8

Eight sets of eight different wires of rods each 250 mm long A class kit of eight sets of eight different wires of rods each 250 mm long for compa...

View full details
PH0401

Thermal Conductivity of Metal - Economy

Comprising strips of copper, iron, aluminium and brass fixed on wooden ring.Thermal Conductivity of Metal - Economy

PH0400B

Thermal Conductivity of Metal - Superior

Comprising strips of copper, iron, aluminium and brass fixed on wooden ring.Comprising strips of copper, iron, aluminium and brass fixed on wooden ...

View full details
PH0400A

Thermistor Demonstration - NTC - 4.7 Kohm Inside Glass Tube - Eisco Labs

Thermistor Demonstration Apparatus. NTC based thermistor with a nominal resistance of 4.7 kohm inside a heavy duty glass tube. 4mm sockets for ele...

View full details
PH0429

Thermo Hygrometer, Diameter 105mm

For measuring of relative humidity and temperature both in room and air. Range -10° to 50°C for thermometer and 0 to 100% for Hygrometer, in metal ...

View full details
PH0238B

Thermo Hygrometer, Diameter 85mm

Range -10° to 50°C for thermometer and 0 to 100% for Hygrometer. Supplied in metal case.For measuring of relative humidity and temperature both in ...

View full details
PH0238A

Thermopile - Copper-iron

With four copper and four iron wires approximately 130 mm long, twisted together to form seven junctions, four on one side, three on the other. Wit...

View full details
PH0428

Thiele Tube

Diameter of main tube is 25 mm Length 150 mm Supplied in pack of 2 tubes. For determining the melting point of organic compounds. Diameter of main ...

View full details
PH0409

Turbojet Engine (Gas Turbine) Model - Eisco Labs

Hand painted model 17" long and approximately 6" tall This section cut model is constructed of light and strong metal showing air intake, axial fl...

View full details
PH0494

Turbojet Gas Engine Desktop Model - 19"x9" Metal Base, 16" Turbojet Length - Eisco Labs

Desktop model turbojet measuring 20"x9" at the base Beautifully hand-painted by artisans, this model is metal with the exception of the rotors, wh...

View full details
PH0494H

Two-stroke Diesel Engine Model - Eisco Labs

EISCO Two-stroke Diesel Engine Model(1) ModelThis model shows the internal structure and operating principles of an air cooled two-stroke engine. A...

View full details
PH0490

Vacuum Flask

Double moulded, capacity of 1.5 litre Double moulded, capacity of 1.5 litre

PH0436THF

Vacuum Pump Model EISVAC-II

Oil free vacuum pump, exclusive oil-less construction of piston or diaphrag never requires lubrication, practically maintenance free, portable ligh...

View full details
PH0168B

Vacuum Pump Plate on Aluminum Base, 10" Diameter, Stopcock, Rubber Seal - Rubber Seal

Vacuum Pump Plate Mounted on a sturdy aluminum base. Features a 10" diameter vacuum plate with a rubber seal which facilitates sealing in bell jar...

View full details
PH0156C

Vacuum Pump with plate, Input 110/120V, 60Hz

A high quality vacuum pump offered in 120 Volts or 220 Volts version is a superior offering to our old version. This CE- marked version is an excel...

View full details
PH0168C-V1

Vacuum Pump with plate, Input 220/240V, 50/60Hz

A high quality vacuum pump offered in 120 Volts or 220 Volts version is a superior offering to our old version. This CE- marked version is an excel...

View full details
PH0168C-V2

Vacuum Pump without plate, Input 110/120V, 60Hz

A high quality vacuum pump offered in 120 Volts or 220 Volts version is a superior offering to our old version. This CE- marked version is an excel...

View full details
PH0168D-V1

Vacuum Pump without plate, Input 220/240V, 50/60Hz

A high quality vacuum pump offered in 120 Volts or 220 Volts version is a superior offering to our old version. This CE- marked version is an excel...

View full details
PH0168D-V2

Venturi Tube

Used to measure flow of liquid, consisting of a tube with a short, narrow center section and widened, tapered ends. Length 190mm To investigate pr...

View full details
PH0137

Venturi Tube Demonstration

Investigate the relationship between the speed of a fluid and its pressure. Consists of a glass venturi tube with two different diameters, with a s...

View full details
PH0137VD

Wankel Rotary Engine Model - Eisco Labs

Hand powered Demonstrates motion of the Wankel engine Great gift for the car enthusiast EISCO Wankel Engine Model, Hand poweredThis model shows th...

View full details
PH0496

Wet and Dry Thermometer - Masons

Wall mounted comprising two thermometer tubes with double scale calibration. Red alcohol filled for easy readability. Two thermometer tubes with do...

View full details
PH0232A

Whirling Hygrometer,

Two thermometers engraved with les fronts mounted in case, Range -5 to +50°Cx0.5°C, supplied in carrying cover.The ventilated type of hygrometer gi...

View full details
PH0234